GASKETING . NET


 
About UsSearchContact UsProductsSite Map


Gasket
Material

Aflas

Ameri-lon

Armstrong

Buna

EPDM

EPTFE

Fish Paper

Flexible
Graphite

Grafoil

Mica

Neoprene

Nitrile

Non-Asbestos

PTFE

Rubber
 

Silicone

Urethane

Viton

JM Clipper

DX Seal

 

 

SICHEM Biaxial HS10 PTFE Gasket Material


 

Ameri-lon 9504 / S50 Ameri-lon 9510 / S33 Ameri-lon 9500 / S11
Ameri-lon 9504 is a true re-structured PTFE gasket sheet with excellent physical properties to be used in the most demanding applications. Its unique construction limits the cold flow problems associated with skived PTFE sheets.  It is very effective in applications where available bolt load is low due to is glass sphere content.

Color: Blue

Ameri-lon 9510 is a true re-structured PTFE gasket sheet with excellent physical properties to be used in the most demanding applications. Its specific construction of virgin PTFE and Barium Sulfate fillers, limits both creep and cold flow in service and at temperature.


Color: Off White

Ameri-lon 9500 is a premium re-structured PTFE gasket sheet with excellent physical properties that can be used in most strong acids, except for Hydrofluoric acid. 9500 is made of 100% PTFE and silica fillers.

 

Color: Sand

HS10 Ameri-lon Sheets

Ameri-lon PTFE sheets are available in 24" X 24", 36" X 36", 48" X 48" and 60" X 60" sizes in thick nesses from 0.010" to ".

 

Ameri-lon Physical Properties

Ameri-lon a new family of products using a new hybrid material, Ameri-lon is the result of years of experience in producing PTFE materials.  It is designed for a wide range of demanding industrial requirements including gasket and bearing applications.  Ameri-lon is filled PTFE, uniquely combining the properties of PTFE and Fller materials.  The Filler enhances the physical properties of the PTFE and results in a superior gasket material.  Ameri-lon shows less cold flow and greater sealing ability than other filled Teflon materials (PTFE) or Fluorocarbons.  It maintains the chemical attack resistance and the temperature range of other Teflon based sheets.

Ameri-lon is available in a wide range of products including gaskets, sheet, molded tube and rod as well as finished and machined items

Ameri-lon can be considered as an equivalent to the Garlock Gylon Product range.  The interchange for the Gylon products is as follows:

 

*Ameri-lon 9504 / S50 = Gylon 3504

*Ameri-lon 9510 / S33 = Gylon 3510

*Ameri-lon 9500 / S11 = Gylon 3500

*Ameri-lon = Gylon 3450/3545

*Amerilon  = Gylon Chemrex 3570

Ameri-lon inquiries can be answered by our Inside sales Staff at 714-593-9780  by Fax at 714-593-9701 or by 

E-mail at sales@americansealandpacking.com

 

* This is to be used as a general guide only.  All applications should be considered individually based on the temperature, pressure, media being sealed, Ph, gasket dimensions, torque load, bolt size and any other factor effecting the gasket.  For assistance in determining the suitability of an application contact our technical staff at American Seal & Packing. No application should be undertaken by anyone without independent study and evaluation for suitability. Never use more than one gasket in one flange joint, and never reuse a gasket. Improper use or gasket selection could cause property damage and/or serious personal injury. Data reported in these pages is a compilation of field testing, field service reports and/or in-house testing. While the utmost care has gone into publishing the information contained herein, we assume no responsibility for errors. Specifications and information contained in these pages are subject to change with notice. This edition cancels and obsoletes all previous editions.

 



Ph: 714-593-9780           Fax: 714-593-9701

E-Mail: sales@americansealandpacking.com

Call American Seal & Packing for your gasket material requirements.

PTFE Gasket Material

Teflon  is a registered trademark of DuPont.
Ameri-lon  is a registered trademark of American Seal & Packing
 
 
About Us | Search | Contact Us | Products | Site Map